Ergonomic PU Leather Gaming Chair with Lumbar Support
PU leather ergonomic gaming chair with removable lumbar and headrest pillows, retractable footrest and 320 mm nylon base. Six colourways, OEM/ODM factory.
- Overview
- Recommended Products
- Racing bucket seat – The defining feature of a gaming chair: a tall back with winged shoulders and raised side bolsters that hold the torso during long sessions.
- Removable bow-tie headrest pillow – Retained by straps through two cutouts in the upper backrest.
- Removable lumbar pillow – Rectangular, positioned at the base of the back where support is lost first.
- Linkage armrests – PP armrest with a soft PU pad, bolted to seat and backrest so the pad follows the recline.
- Lift, lock and tilt mechanism – Height and recline from a single lever, with a locking position for work.
- 100# class II gas lift – Painted cylinder with a dust-free cover.
- 320 mm five-star nylon base – Black, sized against the seat width to keep the tipping circle honest.
- Twin-wheel swivel casters – Black nylon wheels with a PU-glide tread that protects hard flooring.
- Retractable footrest – Padded, folded under the seat and flipped out for reclined use.
- Six colourways – Black and white, black and blue, black and red, black and green, pink and white, and all black.
- PU leather upholstery – Wipe-clean, colour-matched panels with contrast stitching.
- Flat-pack export carton – One chair per carton, hardware bagged by assembly step.
- Upholstery: PU leather over the seat, backrest and both pillows of this gaming chair, with contrast stitching along the panel seams.
- Padding: Foam in the seat pan, backrest and bolsters, with the lumbar and headrest pillows separately filled so they can be removed.
- Armrests: PP armrest body with a soft PU pad on the contact surface, linkage-mounted to seat and backrest.
- Gas lift: 100# painted steel cylinder, class II, fitted with a dust-free cover at the base joint.
- Base and casters: Black nylon five-star base, 320 mm diameter, with twin-wheel swivel casters running a PU-glide tread.
- Mechanism: Lift, lock and tilt unit under the seat pan, operated by a single lever on the right.
- One gaming chair per export carton, flat-packed with the backrest, seat, base, gas lift, casters and hardware in the same box.
- Hardware is bagged and labelled by assembly step, so the fixings for each stage are separated before work starts.
- The backrest bolts to the seat pan through pre-drilled plates; no cutting or drilling on site.
- Casters press into the base sockets and the gas lift drops into the base centre and the mechanism, so the base assembly needs no tools.
- The headrest and lumbar pillows strap on and the footrest ships pre-fitted under the seat, so both are ready without assembly.
- Esports and streaming setups – A bucket seat that holds posture through a full session, with the footrest out between matches.
- Home gaming rooms – Six colourways let a room scheme carry through without changing model.
- Home office and gaming in one chair – The locking recline position converts a gaming chair into a working chair.
- Corporate recreation rooms – Wipe-clean PU leather survives shared use and vending-area spills.
- Internet cafés and esports venues – Removable pillows and replaceable casters keep a fleet serviceable.
- Distributor and retail programmes – One carton, one packing list and mixed colourways per container.
- ISO 9001 certified quality management system, with traceable production records
- FSC certified wood sourcing for the packaging and panel components
- Amfori BSCI factory audit, the social compliance qualification for European and US supermarket programmes
- SGS testing cooperation, with mechanical and material test reports to EU EN527 and US BIFMA standards supplied to buyers
- USPTO registered US trademark
- Factory in Jiaxing, Zhejiang, 90 km from Shanghai and Hangzhou
- One gaming chair per carton, flat-packed, with the backrest and seat protected against scuffing in transit.
- Base, gas lift, casters and hardware packed in the same carton as the upholstered parts.
- Mixed colourways load in a single container against one packing list, which keeps a multi-colour programme on one bill of lading.
- FOB Shanghai or Ningbo, both within 90 km of the factory.
- Lead time 15–35 working days after deposit, with samples at 7 working days.
- Payment by T/T, or by L/C and Escrow; quoted in USD or EUR.
- Pre-production sample before mass production and a final inspection before shipment on every gaming chair order.
- Sample orders ship in 7 working days, with the sample cost confirmed at quotation.
- OEM and ODM development in-house, from cover colour to carton artwork and private label.
- One account manager per order for sampling, production scheduling and shipping documents.
- Warranty and spare-parts terms confirmed per order and per market, since distributor programmes differ.
Description
A gaming chair has to do two jobs that pull against each other: hold the user in a fixed, supported posture for hours, and release them the moment they stand up. This model resolves that with a racing-derived bucket seat — a tall back with winged shoulders, raised side bolsters and a seat pan that places the user inside the chair rather than on top of it.
The ergonomic work sits in the two loose cushions. A bow-tie headrest pillow is retained by straps through two cutouts in the upper backrest, and a rectangular lumbar pillow rests at the base of the back, where the spine loses its natural curve against a flat seat back. Both are removable, which matters in commercial use: a soiled pillow is replaced in seconds without retiring the chair. The armrests are linkage-mounted — padded in soft PU and bolted to both the seat and the backrest — so when the back reclines, the forearm travels with it instead of being left behind.
Underneath, the build is deliberately conventional, because conventional is what survives nightly use. A lift, lock and tilt mechanism sits under the seat pan with a single lever for height and recline. The gas lift is a 100# painted cylinder in class II with a dust-free cover, mounted on a 320 mm five-star black nylon base and five twin-wheel swivel casters with a PU-glide tread. The 320 mm base diameter is the number that governs stability: it sets the tipping circle against the seat width, which is why a gaming chair with a wide bucket seat is not automatically a stable one.
PU leather is the correct cover for this category rather than a compromise. It wipes clean, holds colour across six colourways without the batch variation of fabric dye lots, and takes the panel stitching that gives the bucket seat its shape. For a distributor holding stock across several colours, that consistency is what keeps a replacement seat cover matching the original.
For buyers, the platform is narrow on purpose: one model, six colourways, one mechanism family, one carton. That narrowness is the commercial argument — mixed colourways load in a single container against one packing list, a sample ships in seven working days, and bulk production runs fifteen to thirty-five working days after deposit. A gaming chair programme that scales from a sample to a container without changing tooling is the difference between testing a market and stocking a line.
Key Features
Core Specifications
| Parameter | Detail |
|---|---|
| Model number | MR-GC003 |
| Product type | Ergonomic gaming chair with headrest, lumbar pillow and footrest |
| Upholstery | PU leather |
| Armrest | PP armrest with soft PU pad, linkage mounted |
| Mechanism | Lift, lock and tilt |
| Gas lift | 100# painted gas lift, class II, with dust-free cover |
| Base | 320 mm black nylon, five-star |
| Casters | Black twin-wheel swivel casters |
| Package | Standard export carton, one chair per carton |
| Payment terms | T/T; L/C and Escrow also accepted |
| Sample lead time | 7 working days |
| Bulk lead time | 15–35 working days |
Colourways
| Colourway | Main panels | Accent panels |
|---|---|---|
| Black and white | Black | White |
| Black and blue | Black | Blue |
| Black and red | Black | Red |
| Black and green | Black | Green |
| Pink and white | Pink | White |
| All black | Black | Black |
Materials & Finish
Assembly & Installation
Applications
Customization
| Option | Details |
|---|---|
| Colourway | Six standard combinations; custom colours on volume orders |
| Upholstery | PU leather standard; alternative covers developed on OEM orders |
| Branding | Logo on the headrest or back panel, custom carton, insert cards |
| Packaging | Standard export carton, or custom print and inner protection |
| Base and casters | Standard 320 mm nylon base with twin-wheel casters |
| MOQ | 20–50 pcs for regular lines, 200 pcs for special colours |
| Mixed loading | Different colourways accepted in one container |
Certifications
Packing & Logistics
Service
FAQ
Q: What colourways does this gaming chair come in? A: Six standard combinations — black and white, black and blue, black and red, black and green, pink and white, and all black. Custom colours are available on volume orders, and different colourways can be mixed in one container.
Q: Are the headrest and lumbar pillows removable? A: Yes. The bow-tie headrest pillow is held by straps through two cutouts in the upper backrest, and the rectangular lumbar pillow rests loose at the base of the back. Both lift off, which lets a venue replace a soiled pillow without replacing the chair.
Q: What gas lift and base does the chair use? A: A 100# painted gas lift in class II with a dust-free cover, mounted on a 320 mm black nylon five-star base with five twin-wheel swivel casters.
Q: Does the chair have a footrest? A: Yes. A padded footrest is folded under the seat and flips out for reclined use, so the gaming chair works for console play and for resting between sessions.
Q: What is the minimum order and lead time? A: 20 to 50 pcs for regular lines and 200 pcs for special colours. Samples ship in 7 working days and bulk orders in 15 to 35 working days after deposit.
Q: Can this gaming chair be used for office work? A: Yes. The mechanism locks the recline, so the same gaming chair holds an upright working posture through a working day, and the PU leather wipes clean in a shared office.
