Description
A lounge chair with ottoman is bought as one unit, not two products. The chair sets the posture and the silhouette; the ottoman has to match the fabric batch, the leg finish and the seat height, or the pair reads as an afterthought in the showroom. This page covers four constructions that share that logic but differ in how they are built: a plush velvet barrel set on black metal legs, a button-tufted linen barrel chair on tapered rubberwood, a structured bean-bag chair with a cylindrical pouf filled with EPS beads, and a flat-sewn patchwork wingback with a dipped-top footstool on natural wood legs.
The four were previously sold from four separate pages, each describing one construction with near-identical wording. Buyers searching for a lounge chair with ottoman were landing on whichever page ranked that week, comparing velvet against patchwork without a shared frame of reference. Consolidating them puts the real decision points side by side: upholstery, leg material, tufting method, seat depth and carton size. The differences now live in one model table instead of four competing pages, and a buyer can move from "which construction" to "which carton" without leaving the page.
Every lounge chair with ottoman here is made in Jiaxing, Zhejiang, 90 km from Shanghai and Hangzhou, by a factory that has supplied leisure chairs, ottomans and sofa beds to North America and Europe since 2005. Chairs and ottomans are cut from the same fabric roll and packed in the same carton, so a retailer receives matched pairs rather than two shipments that may not agree on dye lot.
Key Features
- Four lounge chair with ottoman constructions under one purchase order – velvet barrel, button-tufted linen barrel, EPS-filled bean bag and flat-sewn patchwork, so a single container can carry a coordinated floor display.
- Chair and ottoman cut from the same fabric roll – dye lot and pile direction match across the pair, which is what showroom photography depends on.
- 400 lb load rating on the patchwork lounge chair with ottoman – verified on the product specification graphic, giving a defensible number for family, rental and contract use.
- Horizontal channel tufting on the velvet barrel back – the back is divided into padded horizontal channels, which holds the panel upright instead of letting it slump with use.
- Button tufting on the linen barrel back – a staggered button pattern pulls the back into a shallow curve, keeping the seat depth consistent across the width.
- No buttons on the patchwork set – the panels are sewn flat over the padding, so there are no tufts to loosen or re-stitch in high-turnover hospitality rooms.
- EPS bead fill on the MR806 – the bean-bag chair holds a structured back and arm line rather than collapsing into a soft mound, and the pouf keeps a flat top for leg support.
- Side pocket on the velvet and bean-bag chairs – a flat stitched pocket on the outer arm takes a magazine, remote or menu without adding hardware.
- Black powder-coated metal legs, splayed – the velvet set sits on four angled steel legs with protective floor caps, and the ottoman uses a folding X-frame base.
- Tapered solid wood legs on the linen and patchwork sets – rubberwood on MR-AC113, natural-finish wood on the patchwork set, both tapered and splayed for the mid-century profile.
- One carton per set – chairs and ottomans ship together in a single carton, which simplifies receiving and prevents the two pieces being separated in the warehouse.
- Removable legs, no glue – legs bolt on and the ottoman frame folds flat, so the set can be re-packed or moved without a technician.
Specifications
| Parameter | Detail |
|---|---|
| Product type | Lounge chair with matching ottoman / footstool |
| Configurations | 4 (see Model Range) |
| Upholstery options | Velvet, linen weave, PU-look leather, linen patchwork |
| Frame | Solid wood and engineered wood, with steel leg mounts |
| Seat filling | High-density foam |
| Ottoman filling (MR806) | EPS bead |
| Leg options | Black powder-coated metal, tapered rubberwood, natural tapered solid wood, floor-standing |
| Load capacity | 400 lb / 181 kg (patchwork set) |
| Colour | Customized / optional |
| MOQ | 10 pcs (MR806), 50 pcs (patchwork set), on request for other models |
| Packing | 1 pc per carton |
| Carton size | 59.5 × 69.4 × 64.4 cm (MR-AC113); 95.5 × 65.5 × 45.5 cm (patchwork set) |
| Port of loading | Shanghai / Ningbo |
| Payment terms | T/T, L/C, Escrow |
| Currency | USD, EUR |
| After-sale service | 1 year |
| Place of origin | Zhejiang, China |
| Brand | MERRY |
Model Range
| Model | Set contents | Upholstery | Chair size | Ottoman size | Legs |
|---|---|---|---|---|---|
| Velvet barrel set | Chair + footstool | Matte velvet | 72 × 80 × 93 cm | 41 × 41 × 37 cm | Black metal, splayed |
| MR-AC113 | Chair + ottoman | Linen weave | 78 × 78 × 73 cm | Matched ottoman | Tapered rubberwood |
| MR806 | Chair + cylindrical pouf | PU-look leather | 63 × 63 × 63 cm | 35 × 35 × 25 cm | Floor-standing |
| MERRY patchwork | Chair + footstool | Linen patchwork | 68 × 76 × 98 cm | 52 × 39 × 37 cm | Natural tapered wood |
The velvet barrel set is supplied under a model code quoted on the order confirmation. MR-AC113 and MR806 are stocked model numbers. The patchwork set carries the MERRY brand mark and is quoted by description and colourway.
Materials & Finish
Upholstery is selected per construction. The velvet lounge chair with ottoman uses a matte, brushed velvet with a short pile, which reads soft under showroom lighting without the sheen that flattens in photography. MR-AC113 uses a woven linen-blend with visible slub texture in an off-white or oatmeal tone, and the patchwork set uses linen panels sewn from mixed solids and geometric prints, with a solid dark chocolate shell wrapping the back and sides so the patchwork reads as a deliberate front panel rather than an all-over print.
Frames are solid wood and engineered wood, with steel mounts at the leg positions. Seat platforms are foam-filled; MR806 adds EPS bead filling to hold its structured back and arm line. The velvet set's ottoman is finished with black piping where the cream fabric meets the black frame, and its seat cushion is edged with matching piping to keep the corner definition.
Leg finishes are the main visual variable. The velvet set uses black powder-coated steel, splayed and capped with protective floor glides. MR-AC113 uses tapered rubberwood in a medium-to-dark brown. The patchwork set uses natural-finish tapered wood with visible grain. MR806 is floor-standing with no legs, so the fabric runs to the base.
Assembly & Installation
Every lounge chair with ottoman in this range ships knocked down with legs removed. Legs bolt into pre-fitted steel mounts using the supplied hardware; no glue, no drilling and no upholstery work is required. The velvet set's ottoman uses a folding X-frame base that opens and locks without tools, which matters where the piece is re-positioned between seasons.
Each lounge chair with ottoman ships as one carton, so receiving staff handle a single line item per unit. Legs and hardware are bagged and packed in the carton with the chair, not shipped separately. Assembly is a two-person task on the wingback because of its height, and a one-person task on the barrel and bean-bag models.
Applications
- Living rooms and apartment seating groups where a lounge chair with ottoman is bought as one piece
- Hotel lounges, suites and lobby corners, where a patchwork or velvet lounge chair with ottoman holds its shape through daily turnover
- Bedroom reading corners, particularly MR806 where the low profile suits smaller floor plans
- Office reception and waiting areas that need a softer seat than a bench
- Furniture showrooms and retail floors, where four lounge chair with ottoman constructions can be displayed as one coordinated range
- Members clubs, cafés and library rooms with a mid-century interior scheme
- Rental and serviced apartments, where one carton per set speeds up re-furnishing between tenancies
Customization
| Option | Scope |
|---|---|
| Upholstery | Velvet, linen weave, PU-look leather or patchwork, to a supplied swatch |
| Colour | Customized on all models; optional colour selection on MR806 |
| Patchwork palette | Colour blocks and print mix set per order |
| Leg finish | Black powder-coated metal, rubberwood, natural wood or painted |
| Piping | Contrast or tonal piping on cushions and ottoman edges |
| Branding | Logo embroidery, woven labels and private-label packaging |
| Carton printing | Buyer's marks, barcodes and shipping marks |
| Mixed containers | Multiple models and colourways in one container |
Custom lounge chair with ottoman orders are built to a signed specification sheet. That sheet is kept on file so repeat orders reproduce the same fabric, leg finish and carton dimensions.
Certifications
The factory building every lounge chair with ottoman here operates to ISO 9001 quality management and holds FSC chain-of-custody certification for wood components. Social compliance is audited to BSCI standard, and the audit mark appears on the product presentation used for wholesale buyers. Certification documents are supplied with quotations on request.
Packing & Logistics
Each lounge chair with ottoman is packed one piece per carton. MR-AC113 ships in a 59.5 × 69.4 × 64.4 cm carton; the patchwork set ships in 95.5 × 65.5 × 45.5 cm. Cartons are labelled with model, colourway and carton number, and shipping marks can be printed to the buyer's format.
Loading for every lounge chair with ottoman order is from Shanghai or Ningbo. Both ports are within the same working week from the Jiaxing factory, which keeps sailing cut-offs predictable for buyers running fixed retail launch dates. Container plans are issued per order with carton count and gross weight per model, so freight forwarders can price the booking before production closes.
For programmes that repeat, carton dimensions and pack quantities are frozen on the specification sheet. That prevents the freight cost drifting between shipments when a fabric or leg change alters the pack.
Service
Lounge chair with ottoman orders are quoted FOB Shanghai or Ningbo in USD or EUR, with T/T, L/C and Escrow accepted. A pre-production sample is approved before mass production, and a final inspection is carried out before shipment on every order.
After-sale cover runs for one year from delivery. Spare legs, glides and hardware are available as separate line items, which keeps a damaged unit in service instead of writing off the whole set.
OEM and ODM work is handled in-house: buyers supply a drawing or a reference sample, the factory develops the construction, and the approved specification is locked for repeat orders. Private-label buyers receive the set under their own brand with matching carton artwork.
For buyers scaling a range, the factory has run modular programmes for 50 European chain hotels, cutting logistics cost by 25% and delivery time by 40%, and has supported US e-commerce brands launching with 15–50 pcs, shortening time to market by 60%. One North American brand grew sales 300% in two years on a flat-pack conversion that cut ocean freight by 35%.
Q: What is the minimum order quantity for a lounge chair with ottoman? A: 10 pcs on the MR806 bean-bag chair and 50 pcs on the patchwork set. MOQ for the velvet barrel set and MR-AC113 is quoted per order because it depends on the fabric selection.
Q: Can the chair and ottoman be ordered in different fabrics? A: Yes, but the lounge chair and ottoman are normally cut from the same fabric roll so the dye lot and pile direction match. If you need a contrast ottoman, specify it on the order so both pieces are cut and packed together.
Q: How is the set packed, and what is the carton size? A: One set per carton. MR-AC113 packs into 59.5 × 69.4 × 64.4 cm and the patchwork set into 95.5 × 65.5 × 45.5 cm. Legs and hardware are bagged inside the same carton.
Q: Do the legs come attached? A: No. All four sets ship knocked down. Legs bolt into pre-fitted steel mounts with supplied hardware, and the velvet set's ottoman uses a folding X-frame base that opens without tools.
Q: What load rating does the patchwork set carry? A: 400 lb, as stated on the product specification for the chair and ottoman set.
